+
  • q76.jpg

Máquina de moldeo por inyección

Pinno

Categoría:

Otros

Resumen: La compañía opera una gama completa de productos, incluyendo granuladores, extrusoras, pulverizadores, molinos, chillers, máquinas de alimentación automática...


Detalles

ITEM UNIT 160SeⅢ 480SeⅢ 560SeⅢ 660SeⅢ
    1600-659 4800-3508 5600-4762 6600-4762
Screw diameter mm 40 45 50 70 80 94 80 90 105 80 90 105
Theoretical shot volume cc 283 358 442 1539 2011 2776 2212 2799 3810 2212 2799 3810
Shot weight (PS) g 257 326 402 1401 1830 2526 1991 2519 3429 1991 2519 3429
  oz 9.1 11.5 14.2 49.5 64.7 89.3 70.3 89 121.2 70.3 89 121.2
Length/Diameter ratio L/D 22.5 20 18 24.2 21.2 18 23.6 21 18 23.6 21 18
Injection pressure MPa 223 176 142 228 174 126 215 170 125 215 170 125
Injection rate cm3/sec 147 187 230 352 460 635 521 660 898 521 660 898
Injection stroke mm 225 400 440 440
Max. screw speed rpm 274 170 161 161
Plasticizing capacity (PS) g/s 23.2 30 33.6 72.7 94.3 131.3 87.9 106.7 161.3 87.9 106.7 161.3
Injection unit force ton 5.7 12 20.4 20.4
Carriage stroke mm 320 480 600 660
Clamping force ton 160 480 560 660
Max. daylight mm 1000 1600 1730 1830
Clamping stroke mm 480 780 880 910
Distance btwn. Tie bars mm 470x470 820x800 860x840 920x920
Min mould dimension mm 320x320 570x560 600x590 645x645
Mould thickness range mm 150~520 300-820 350-850 350-920
Ejector force ton 7.7 16.6 16.6 16.6
Ejector stroke mm 160 240 240 290
No. of ejector pins unit 5 13 17 21
Max. motor POWER kW 16.4 50.7 67.1 67.1
System pressure MPa 17.5 17.5 17.5 17.5
Hydraulic pump capacity L/min 112.5 275 385 385
No. of heater zones unit 4+1+1 5+1 5+1 5+1
Heater input power kW 11.48 35.04 35.73 35.73
Ultimate capacity kW 28.88 86.64 103.83 103.83
Current A 39.5 118.6 126.2 126.2
Net weight ton 5.68 16.72 23 26
Oil filling capacity L 320 700 1000 1000

Consulta


Cita ahora

Soluciones para su industria, listas para su elección

Pinno